1000 Litre RO Plant Price in India – What You Need to Know


If you're researching
“RO Water Plant 1000 Liter Price”, “1000 LPH RO Plant Specification”, or trying to get a “1000 LPH RO Plant quotation PDF”, then this guide is for you. We’ll also look at membrane pricing and what it costs in Delhi, including what a 1000 LPH RO Plant with chiller price might look like. I’ll also reference relevant Romegamart products (and their images/specs) to help you benchmark.


What is a 1000 LPH RO Plant?

  • a1000 LPH RO Plant means a plant that can produce ~1000 litres per hour of purified water under standard feed-conditions. That’s about 24,000 litres/day if run continuously. (Romegamart)

  • Used in commercial settings: hotels, hostels, community supply, small industries, or wherever large water demand exists. (Romegamart)


Key Specification / What to Look for

When someone asks for a 1000 ltr RO Plant Specification, these are the typical features to include in spec sheets (for yourself or vendor):

Component Typical Value / Range
Capacity 1000 LPH output
Feed water TDS 500-5000 ppm (more if very high)
Recovery rate ~50-65%
Membranes Usually 2-4 RO membranes (4040 / 8040-type) TFC (thin-film composite) branded, with high rejection rate.
Pre-treatment Sediment filters (5μ, 1μ), activated carbon, softener (if hardness high), anti-scalant dosing
Post-treatment UV disinfection, mineral cartridges, alkaline adjustment if required
Material of Construction FRP (fibreglass reinforced plastic) vessels, or Stainless Steel (SS) for more durability. Piping UPVC/CPVC/SS depending on requirements.
Pumps High pressure pump + feed pump, energy efficiency matters
Power / Electric Single or three-phase; voltage depending on location (Delhi etc.), adequate motor rating etc.
Control / Automation Pressure gauges, flow meters, TDS monitors, automatic shutdowns, control panel etc.
Warranty / After-sales Membrane warranty, service support, guarantee period etc.

This kind of spec is essential when asking vendors for a 1000 LPH RO Plant quotation PDF. It ensures apples-to-apples comparison. (Romegamart)


Price Ranges & What Drives Cost

Prices vary a lot. Here are what typical RO Plant 1000 LPH Price ranges look like in India, and what factors push costs higher or lower. (Romegamart)

Typical Price in India & in Delhi

  • A standard FRP construction 1000 LPH RO plant with moderate features (no chiller, basic pre/post-treatment) tends to cost between ₹140,000 to ₹200,000. (Romegamart)

  • In Delhi, because of higher labour, transport, brand premiums etc., prices often lean toward the upper side (~₹195,000-₹210,000) for systems with UV, good brand membranes, or more “finish”. (Romegamart)

  • If you want a 1000 LPH RO Plant with chiller, you’ll probably pay about 25-50% more over a base plant, depending on how much cooling you need, quality, insulation, etc. So such plants might cost ₹180,000 to ₹280,000+, depending on specs. (Romegamart)

What Affects the Price

  • Material: FRP vs SS — SS is more durable and more expensive.

  • Membrane: Brand, rejection rate, lifespan. High-quality branded membranes cost significantly more.

  • Pre- & Post-treatment equipment (UV, softeners, etc.) adds cost.

  • Pumps & motors, energy efficiency.

  • Automation, control, sensors, instrumentation.

  • Chiller inclusion (if needed).

  • Labour, installation, civil work, piping, and local transport.

  • Warranty, after-sales service.


Membrane Price

Since “1000 LPH RO Plant Membrane Price” is one of your key searches:

  • A single branded membrane of type 4040 / 8040 might cost anywhere from ₹10,000 to ₹40,000+ depending on brand and performance. (Romegamart)

  • If your 1000 LPH plant uses 2 or more membranes, this component becomes a large share of the cost. Also need membrane housings, pressure vessels etc. (Romegamart)


Example: Romegamart Products & Comparisons

Here are some example products from Romegamart (with links you provided) to help you see what is offered, and to benchmark prices/specs visually and technically. Using actual product images or listing photos helps a lot for comparison (“1000 LPH RO Plant images”).

  1. 1000 LPH Commercial RO Plant Blue Colour FRP Material – Icon Filter
    Product link: Romegamart’s “1000 LPH Commercial RO Plant Blue Colour FRP Material – Icon Filter”. (Romegamart)
        This is directly a 1000 LPH plant with FRP vessels; comparing its quoted price (if available) and what they offer (pipe material, membrane brand, after-sales) is useful.

  2. Also Romegamart has a 1000 LPH RO Plant category under Commercial Systems. (Romegamart)

  3. Lower capacity examples (for comparison):

    • “250 LPH Faucet-Mounted Electric RO Healthy FRP Material – Ayush Aqua System” etc. These show how scaling down reduces price, but cost per litre is higher. (Romegamart)

Using these, you can see photos of pumps, membranes, piping etc. and check the finish, quality, which helps judge whether you’re getting value for money. Visuals also help respond to “1000 LPH RO Plant images” keyword in SEO. (Romegamart)


Sample Quotation & PDF Components

If you ask a vendor (like Romegamart or others) for a 1000 LPH RO Plant quotation PDF, here’s what should be inside:

  • Detailed specifications (as above)

  • Brands of membranes, pumps etc.

  • Material of construction (FRP / SS)

  • Pre- & post-treatment inclusions (UV, mineralisation etc.)

  • Whether chiller is included or optional

  • Power / electrical requirements

  • Warranty & service terms

  • Delivery, installation & civil work costs

  • Taxes / GST, transport costs

  • Lead time


Putting It All Together — What To Expect in Delhi

For someone in Delhi searching specifically “RO Water Plant 1000 LPH Price in Delhi”, roughly:

  • For a standard FRP 1000 LPH plant without chiller, basic pre-/post-treatment: ₹140,000-₹180,000

  • With UV, better membranes, better control, maybe mild finishing, you might pay ₹190,000-₹210,000+

  • If you want with chiller, or SS vessels, or high-end branded components, or full automation, price could go into ₹220,000-₹280,000+, depending on cooling needs etc.


SEO Tips / Keyword Use

To help the page rank (if you’re using this blog post for SEO), use the following:

  • Include keywords like 1000 LPH RO Plant with chiller price, RO Water Plant 1000 Liter Price, 1000 LPH RO Plant Membrane Price, 1000 Ltr RO Plant Specification, RO Water Plant 1000 LPH Price in Delhi, 1000 LPH RO Plant images in headings, sub-headings, image alt-texts.

  • Use Romegamart product images (from the 1000 LPH products) with alt text like “1000 LPH Commercial RO Plant Blue Colour FRP Material – Romegamart” etc.

  • Embed links to relevant Romegamart products (you already have some - the 1000 LPH plant page, the commercial systems category etc.).


Final Thoughts & Recommendations

  • Don’t go for the cheapest – membrane quality & after-sales matter a lot, because maintenance/downtime can cost more in long run.

  • If you think you’ll ever need cold water or chilled output, factor a chiller into the quote early (so base plant is built to accommodate it).

  • Ask for multiple quotation PDFs so you can compare exactly what’s included.

  • Use Romegamart’s product offerings as benchmarks, but also get local vendors in/around Delhi to compare logistical costs, transport and installation.

Post a Comment

0 Comments